Angled Leg Plate (Heavy Duty) for 5/16 inch Lag Screws

Description

Where would use an Angled Leg Plate ?
An angled leg plate is a quick and easy way of fixing a leg (that has a 5/16" lag screw) on an angle to the bottom of a lounge or piece of furniture.
Using screws (not provided by us), fix the plate in position, and then screw the leg in place.

What are the important dimensions ?
The size of the plate is 63 x 63mm.
The thickness of the plate is 1.8mm.
The screw has a 5/16" internal thread.
The angle leg plate will put the leg on an angle of approximately 10 degrees.

What is the difference between the standard and heavy duty version of the angled leg plate ?
The thickness of the plate for the standard is 1.2mm, whereas the heavy duty is 1.8mm.
The 5/16" nut is pressed onto the plate on the standard version, but is welded to the plate on the heavy duty version.
The standard version has 3 fixing holes, whereas the heavy duty version has 4.
We recommend using the standard plate in situations where not a lot of weight is going to be applied. For example a side/coffee table.
We recommend using the heavy duty plate in situations where there is going to be some weight applied. Fox example a chair, foot stool, lounge, bed or dining table.