Skip to content
About Us Our History Custom Woodturning Blogs & News The Workshed FAQ Downloads Review Us Contact Us
80mm Square Bracket for Glass - Curved Cradle (Mirror)

80mm Square Bracket for Glass - Curved Cradle (Mirror)

SKU: IF409XSSM

Material: Mirror 316 Stainless

$55.00 - $55.00
$55.00
$55.00 - $55.00
$55.00

per Piece (Incl. GST)

In stock
Ships from Adelaide

Quantity (per Piece):

Description

Where would you normally use handrail brackets for glass ?
To fix a piece of handrail to toughened glass ranging from 10 to 15mm thick.

What is the bracket made from ?
316 Stainless Steel in a Mirror Polish finish.
This bracket is for EXTERIOR or INTERIOR use.

Do all of the handrails that we sell work with it ?
The plate that the handrail is fixed to is curved; which will suit any of our fully round handrails from 40mm to 60mm in diameter.

How does it fix to the glass ?
The base screws off allowing the end of the bracket (16mm diameter) to fit into a hole that would need to be drilled into the glass. You would then screw the base back on until tight.
To protect the glass, plastic rubbers are supplied with the bracket.

Product Dimensions

Distance from the glass to the centre of the handrail is 80mm.
Size of the base plate that fixes to the glass is 40x40mm.
Spacing between brackets depends a lot on the type of handrail and timber you use; but anywhere from 900 to 1500mm is a good guide.

Cleaning & Maintenance

Without regular cleaning and maintenance discolouration of the surface of the stainless steel by corrosion (tea staining) can occur.

How to reduce the risk of tea staining

  • Absence of corrosives – especially salt, chlorine, cleaning acids etc.
  • Atmospheric Conditions – lower temperatures and low humidity are better.
  • Surface orientation – Open exposure to rain washing is better
  • Surface Finish – In general a smoother finish is better. where practical mirror polish finish may perform better than a brushed finish.
  • Chemical cleanliness or passivation of the surface improves corrosion resistance
  • Appropriate grade selection for conditions
  • Regular Maintenance to limit the accumulation of corrosives

Stainless steel cleaning schedule

The frequency of cleaning will vary depending on environmental factors i.e. proximity to the ocean, atmospheric and urban conditions. Below is intended as a guide and should be varied as required. We recommend using peek stainless steel polish for maintenance.

Environment Distance from Coastline Cleaning Schedule
Clean inland environment 20km + Every 10 - 12 Months
Moderate urban or coastal environment 1-5km Every 4 - 6 Months
Harsh urban or coastal environment < 500m Every 2 - 3 Months
Severe coastal/ marine environment < 500m Every 1 - 2 Weeks
Ships From Adelaide

Local, relaible & affordable shipping anywhere in Australia

Money-Back Guarantee 

Don't love it? Get in touch within 14 days & you'll get a full refund

*conditions apply

Customer Support

Do you have a question about this product? Ask our knowledgable staff!

Give us a call on (08) 8346 8211

Trusted By YOU

See what our customers have to say about us & our service!