Skip to content
About Us Our History Custom Woodturning Blogs & News The Workshed FAQ Downloads Review Us Contact Us
Lag Terminal (Right Hand) - 3.2mm Wire (Hydraulic Swager)

Lag Terminal (Right Hand) - 3.2mm Wire (Hydraulic Swager)

SKU SSW052-6

Material: 316 Stainless

$2.09 - $2.09
$2.09
$2.09 - $2.09
$2.09

per Piece (Incl. GST)

  • In stock
  • Ships from Adelaide

Quantity (per Piece):

Description

Where would you normally use this stainless steel wire cable fitting?
For hydraulically swaged cable balustrading with timber posts.

What is it made out of?
316 Stainless Steel.

How do I fasten the cable to it?
The 3.2mm wire cable goes into the open end of the fitting. Use an hydraulic swager to secure the cable. Do NOT use a hand swager or pliers, as the pressure required to press the metal flat is far greater than can be applied by hand.

Can it be used for exterior applications?
As it is 316 grade Stainless Steel it is more than suitable to be used inside or outside.

Product Dimensions

Click on the detailed CAD drawing (above) for all the important dimensions.

Cleaning & Maintenance

Without regular cleaning and maintenance discolouration of the surface of the stainless steel by corrosion (tea staining) can occur.

How to reduce the risk of tea staining

  • Absence of corrosives – especially salt, chlorine, cleaning acids etc.
  • Atmospheric Conditions – lower temperatures and low humidity are better.
  • Surface orientation – Open exposure to rain washing is better
  • Surface Finish – In general a smoother finish is better. where practical mirror polish finish may perform better than a brushed finish.
  • Chemical cleanliness or passivation of the surface improves corrosion resistance
  • Appropriate grade selection for conditions
  • Regular Maintenance to limit the accumulation of corrosives

Stainless steel cleaning schedule

The frequency of cleaning will vary depending on environmental factors i.e. proximity to the ocean, atmospheric and urban conditions. Below is intended as a guide and should be varied as required. We recommend using peek stainless steel polish for maintenance.

Environment Distance from Coastline Cleaning Schedule
Clean inland environment 20km + Every 10 - 12 Months
Moderate urban or coastal environment 1-5km Every 4 - 6 Months
Harsh urban or coastal environment < 500m Every 2 - 3 Months
Severe coastal/ marine environment < 500m Every 1 - 2 Weeks
Ships From Adelaide

Local, relaible & affordable shipping anywhere in Australia

Money-Back Guarantee 

Don't love it? Get in touch within 14 days & you'll get a full refund

*conditions apply

Customer Support

Do you have a question about this product? Ask our knowledgable staff!

Give us a call on (08) 8346 8211

Trusted By YOU

See what our customers have to say about us & our service!