Hydraulic MINI Wire Swager

Where would you use a hydraulic MINI wire swager?
When doing wire cable balustrade using hydraulically swaged fittings, this tool will allow you to flatten the ends of the fittings so that the wire (3.2mm or 4.0mm) is securely held in place.
It will work on Wire Balustrade Systems 1, 2, 5, 6, 7, 8 ,9 and 10
Please be warned that attempting to use a pair a plyers or something similar is NOT recommended, as the pressure required to flatten the fixings is far greater than can be applied by hand.

When should I use the PRO hydraulic PRO swager vs the MINI swager?

If you intend to use the tool on an ongoing basis, or have a large job (of 200 fittings or more), then we recommend using the pro swager. For smaller, one off jobs, the mini swager is more than suitable.

What is the difference between the PRO hydraulic swager and the MINI hydraulic swager?
The hydraulic pro swager has a longer arm, and gives off more pressure than the mini swager. It is also comes with a wider variety of dies which can be used for a multitude of different purposes.

If you have any questions, please contact us prior to ordering.