80mm Handrail Brackets for Glass (Mirror)
Material: Mirror 316 Stainless
per Piece (Incl. GST)
In stock |
Ships from Adelaide |
Material: Mirror 316 Stainless
per Piece (Incl. GST)
In stock |
Ships from Adelaide |
Description
Where would you normally use handrail brackets for glass?
To fix a piece of handrail to toughened glass ranging from 10 to 15mm thick.
What is the bracket made from?
316 Stainless Steel in a Mirror finish.
This bracket is for EXTERIOR or INTERIOR use.
Which handrails does this bracket suit?
There are 3 different cradles available for this bracket. 1 to suit 50mm round handrail, 1 to suit 38mm round handrail and 1 to suit flat handrail. Please let us know which one you require using the drop down list.
How does it fix to the glass?
The base screws off allowing the end of the bracket (18mm diameter) to fit into a hole that would need to be drilled into the glass. You would then screw the base back on until tight.
To protect the glass, plastic rubbers are supplied with the bracket.
Without regular cleaning and maintenance discolouration of the surface of the stainless steel by corrosion (tea staining) can occur.
How to reduce the risk of tea staining
Stainless steel cleaning schedule
The frequency of cleaning will vary depending on environmental factors i.e. proximity to the ocean, atmospheric and urban conditions. Below is intended as a guide and should be varied as required. We recommend using peek stainless steel polish for maintenance.
Environment | Distance from Coastline | Cleaning Schedule |
---|---|---|
Clean inland environment | 20km + | Every 10 - 12 Months |
Moderate urban or coastal environment | 1-5km | Every 4 - 6 Months |
Harsh urban or coastal environment | < 500m | Every 2 - 3 Months |
Severe coastal/ marine environment | < 500m | Every 1 - 2 Weeks |