Skip to content
About Us Our History Custom Woodturning Blogs & News The Workshed FAQ Downloads Review Us Request A Quote Contact Us
80mm Concealed Handrail Bracket - Curved Cradle (Mirror)

80mm Concealed Handrail Bracket - Curved Cradle (Mirror)

SKU: IF456XSSM-50

Material: Mirror 316 Stainless

$27.17 - $27.17
$27.17
$27.17 - $27.17
$27.17

  per Piece

In Stock
Ships from Adelaide

Quantity (per Piece):

Please Read Before Ordering

Please select the correct saddle from the drop down menu below

Description

The IF456XSSM is an exterior grade 80mm wall-mounted mirror stainless steel handrail bracket with a curved cradle to suit round handrails.

The curved cradle is available in two different sizes, one to suit between 43mm and 51mm handrail, and another to suit 38mm diameter rail. Be sure to select the correct cradle from the drop-down menu prior to ordering.

This bracket is made from a mirror finish 316-grade marine stainless steel, so is therefore suitable for both interior and exterior use.

Product Dimensions

Distance from the wall to the centre of the handrail: 80mm.

Diameter of the round plate that fixes to the wall: 60mm.

Suggested spacing between handrail brackets:
Spacing between brackets depends a lot on the type of handrail and timber you use; but anywhere from 900 to 1500mm is a good guide.

FAQs

Where would you normally use handrail brackets?
To fix a piece of handrail to a wall.

What is the bracket made from?
316 Stainless Steel in a Mirror Polish finish.
This bracket is for EXTERIOR or INTERIOR use.

Which handrails are compatible with this bracket?
There are two cradle options for this bracket. One to suit a handrail with a diameter between 43mm and 51mm, and one to suit 38mm diameter rail. Be sure to choose the correct cradle type from the drop-down menu before adding to cart.

How does it fix to the wall?
It uses 3 screws (not supplied) to fix into timber or into a plastic plug (not supplied) if fixing to brick.
The holes for the screws to fit into are all elongated so as to allow for easy adjustment before fastening the bracket to the wall.
The cover plate fits snuggly to the backing plate.

How does it fix to a timber handrail?
We recommend using timber screws (not provided)

How does it fix to a stainless steel handrail?
We recommend using pop rivets (not provided)

Cleaning & Maintenance

Without regular cleaning and maintenance discolouration of the surface of the stainless steel by corrosion (tea staining) can occur.

How to reduce the risk of tea staining

  • Absence of corrosives – especially salt, chlorine, cleaning acids etc.
  • Atmospheric Conditions – lower temperatures and low humidity are better.
  • Surface orientation – Open exposure to rain washing is better
  • Surface Finish – In general a smoother finish is better. where practical mirror polish finish may perform better than a brushed finish.
  • Chemical cleanliness or passivation of the surface improves corrosion resistance
  • Appropriate grade selection for conditions
  • Regular Maintenance to limit the accumulation of corrosives

Stainless steel cleaning schedule

The frequency of cleaning will vary depending on environmental factors i.e. proximity to the ocean, atmospheric and urban conditions. Below is intended as a guide and should be varied as required. We recommend using peek stainless steel polish for maintenance.

Environment Distance from Coastline Cleaning Schedule
Clean inland environment 20km + Every 10 - 12 Months
Moderate urban or coastal environment 1-5km Every 4 - 6 Months
Harsh urban or coastal environment < 500m Every 2 - 3 Months
Severe coastal/ marine environment < 500m Every 1 - 2 Weeks