Skip to content
About Us Our History Custom Woodturning Blogs & News The Workshed FAQ Downloads Review Us Request A Quote Contact Us
Round Post (1.6mm) - Angled or Horizontal Balustrade - Plain - Mirror

Round Post (1.6mm) - Angled or Horizontal Balustrade - Plain - Mirror

SKU: SSP021-M6
Material: Mirror 316 Stainless
$137.50 - $137.50
$137.50
$137.50 - $137.50
$137.50

per Piece (Incl. GST)

Made to Order (2 week lead time)
Ships from Brisbane

Quantity (per Piece):

Description

Where would you normally use a stainless steel post?
To structurally support a balustrade on a deck, balcony or staircase, in particular, wire cable or glass.

Which saddles go with this post?
Any of the saddles found here.

Why are some posts 1.6mm and others 3.0mm?
This refers to the wall thickness of the post.
In most cases the 1.6mm wall thickness will be enough for use on corner, end and intermediate posts with glass balustrade.
For wire balustrade, you may want to consider going with the heavier 3.0mm wall thickness; particularly in the case of a free standing end post where the correct legal tension required for the wire cable could cause the post to distort. For intermediate and corner posts; the 1.6mm wall thickness is usually enough.

What is it made out of?
316 Stainless Steel in a Mirror Finish.

How should you fasten it to the ground/deck ?
Due to the large number of surfaces that the post could be fixed to, we do not supply any fasteners.
We suggest that you speak to a local hardware store for more info.

Product Dimensions

What are the important dimensions?
Overall Height: 960mm, once one of the saddles has been added.
Wall Thickness: 1.6mm.
Diameter of post: 50.8mm
Diameter of base: 100mm (supplied with cover plate)

Cleaning & Maintenance

Without regular cleaning and maintenance discolouration of the surface of the stainless steel by corrosion (tea staining) can occur.

How to reduce the risk of tea staining

  • Absence of corrosives – especially salt, chlorine, cleaning acids etc.
  • Atmospheric Conditions – lower temperatures and low humidity are better.
  • Surface orientation – Open exposure to rain washing is better
  • Surface Finish – In general a smoother finish is better. where practical mirror polish finish may perform better than a brushed finish.
  • Chemical cleanliness or passivation of the surface improves corrosion resistance
  • Appropriate grade selection for conditions
  • Regular Maintenance to limit the accumulation of corrosives

Stainless steel cleaning schedule

The frequency of cleaning will vary depending on environmental factors i.e. proximity to the ocean, atmospheric and urban conditions. Below is intended as a guide and should be varied as required. We recommend using peek stainless steel polish for maintenance.

Environment Distance from Coastline Cleaning Schedule
Clean inland environment 20km + Every 10 - 12 Months
Moderate urban or coastal environment 1-5km Every 4 - 6 Months
Harsh urban or coastal environment < 500m Every 2 - 3 Months
Severe coastal/ marine environment < 500m Every 1 - 2 Weeks
Ships From Adelaide

Local, relaible & affordable shipping anywhere in Australia

Money-Back Guarantee 

Don't love it? Get in touch within 14 days & you'll get a full refund

*conditions apply

Customer Support

Do you have a question about this product? Ask our knowledgable staff!

Give us a call on (08) 8346 8211

Trusted By YOU

See what our customers have to say about us & our service!