Square Intermediate Post with 2x11 Holes (Open Top) - Satin
Material: Satin 316 Stainless
per Piece
- In stock
- Ships from Adelaide
Please Read Before Ordering
Material: Satin 316 Stainless
per Piece
Please Read Before Ordering
Description
Where would you normally use a square intermediate post with 11 Holes on either side?
As an intermediate post to structurally support a horizontal wire cable balustrade on a deck or balcony.
On a wire balustrade, you need to have a support post approximately every 1.5 metres (when using 3.2mm wire cable).
Which fixings go with this post?
Any of the square rail supports in a sating finish.
What is it made out of?
316 Stainless Steel in a Brushed Satin Finish.
What are the important dimensions?
Overall Height: 960mm, once one rail supports have been added.
Wall Thickness: 1.6mm.
Width: 50.8mm
Depth: 50.8mm
There are 2 rows of 11 holes (each of 4mm diameter) drilled on opposite sides of the post. They are spaced 80mm apart so as to conform to regulations for wire cable balustrade.
How should you fasten it to the ground/deck?
Due to the large number of surfaces that the post could be fixed to, we do not supply any fasteners.
We suggest that you speak to a local hardware store for more info.
*** IMPORTANT - PLEASE READ ***
These posts are specially made when an order is placed. Unless the post is defective in some way, NO REFUNDS will be given if you have ordered the wrong post or you decide to change your mind and want to return it.