Square Plain Post (3mm) for Angled or Horizontal Balustrade - Satin
per Piece (Incl. GST)
Made to Order (1 week lead time) |
Ships from Brisbane |
per Piece (Incl. GST)
Made to Order (1 week lead time) |
Ships from Brisbane |
Description
A 50x50mm square stainless steel plain post with a 3mm wall thickness in a satin finish. Ideal for use with wire balustrade as an end or corner post on an angled balustrade such as a staircase. We recommend using the 1.5mm (SSP126-S6) plain posts as an intermediate post.
The reason why this post is not supplied drilled with M6 rivet nuts fixed in position, is because every stair is at a slightly different in angle, and as a result it is not possible to come up with a one-post-fits-all design.
*** IMPORTANT - PLEASE READ ***
These posts are specially made when an order is placed. Unless the post is defective in some way, NO REFUNDS will be given if you have ordered the wrong post or you decide to change your mind and want to return it.
Without regular cleaning and maintenance discolouration of the surface of the stainless steel by corrosion (tea staining) can occur.
How to reduce the risk of tea staining
Stainless steel cleaning schedule
The frequency of cleaning will vary depending on environmental factors i.e. proximity to the ocean, atmospheric and urban conditions. Below is intended as a guide and should be varied as required. We recommend using peek stainless steel polish for maintenance.
| Environment | Distance from Coastline | Cleaning Schedule |
|---|---|---|
| Clean inland environment | 20km + | Every 10 - 12 Months |
| Moderate urban or coastal environment | 1-5km | Every 4 - 6 Months |
| Harsh urban or coastal environment | < 500m | Every 2 - 3 Months |
| Severe coastal/ marine environment | < 500m | Every 1 - 2 Weeks |