Skip to content
About Us Our History Custom Woodturning Blogs & News The Workshed FAQ Downloads Review Us Contact Us
Stainless Wire Balustrading Kit 4C

Stainless Wire Balustrading Kit 4C

SKU SSWK-4C

Material: 316 Stainless

$18.48 - $18.48
$18.48
$18.48 - $18.48
$18.48

per Kit (Incl. GST)

  • In stock
  • Ships from Adelaide

Quantity (per Kit):

Description

Where would you normally use Stainless Wire Balustrade Kit C?
For hydraulically swaged 4mm cable balustrading between metal posts. (Not suitable for timber posts).
This kit can be used for both horizontal and angled (stair) balustrades.

What parts make up the kit?
1 x SSW100-6 (Long Fork Bottle Screw)
1 x SSW101-6 (Fork Terminal)
2 x SSW057-6 (Eye Bolt)
2 x IF127X (Rivet Nut RHT)

What are the fittings made out of?
316 Stainless Steel, which means they can be used both in external and internal applications.

Which wire cable rope is best suited?
The fittings will work only with 4mm stainless wire cable rope.
1 x 19 configuration for the cable is the best fit, but 7 x 7 and 7 x 19 will also work.

Which tools do I need?
The SSW100-6 (Bottle Screw) and SSW101-6 (Fork Terminal) require the use of the IF120X (Hydraulic Swager) to fasten the fitting to the wire.
Other tools that will be handy to complete the job are IF122X (Wire Cutter), IF124X (Rivet Nut Inserter) and IF133X (Spanner Tensioner).
Cleaning & Maintenance

Without regular cleaning and maintenance discolouration of the surface of the stainless steel by corrosion (tea staining) can occur.

How to reduce the risk of tea staining

  • Absence of corrosives – especially salt, chlorine, cleaning acids etc.
  • Atmospheric Conditions – lower temperatures and low humidity are better.
  • Surface orientation – Open exposure to rain washing is better
  • Surface Finish – In general a smoother finish is better. where practical mirror polish finish may perform better than a brushed finish.
  • Chemical cleanliness or passivation of the surface improves corrosion resistance
  • Appropriate grade selection for conditions
  • Regular Maintenance to limit the accumulation of corrosives

Stainless steel cleaning schedule

The frequency of cleaning will vary depending on environmental factors i.e. proximity to the ocean, atmospheric and urban conditions. Below is intended as a guide and should be varied as required. We recommend using peek stainless steel polish for maintenance.

Environment Distance from Coastline Cleaning Schedule
Clean inland environment 20km + Every 10 - 12 Months
Moderate urban or coastal environment 1-5km Every 4 - 6 Months
Harsh urban or coastal environment < 500m Every 2 - 3 Months
Severe coastal/ marine environment < 500m Every 1 - 2 Weeks
Ships From Adelaide

Local, relaible & affordable shipping anywhere in Australia

Money-Back Guarantee 

Don't love it? Get in touch within 14 days & you'll get a full refund

*conditions apply

Customer Support

Do you have a question about this product? Ask our knowledgable staff!

Give us a call on (08) 8346 8211

Trusted By YOU

See what our customers have to say about us & our service!