Stainless Wire Balustrading Kit A

Name: Stainless Wire Balustrading Kit A
Brand: hammersmithau
SKU: SSWK-A
Price: 7.59 AUD
Availability: InStock

SKU: SSWK-A

Material: 316 Stainless

$7.59 - $7.59

$7.59

$7.59 - $7.59

$7.59

per Kit (Incl. GST)

Stocked Item

Ships from Adelaide

Click here to download PDF instructions

Description

Wire balustrade kit A is a hydraulically swaged 3.2mm cable balustrading kit, designed to be used between timber posts. (Not suitable for metal posts).

This kit can be used for both horizontal and angled (stair) balustrades and is our most popular and versatile wire kit.

FAQs

What parts make up the kit?
1 x SSW050-6 (Long Fork Bottle Screw)
1 x SSW053-6 (Fork Terminal)
2 x SSW054-6 (Coach Screw - 40mm)

What are the fittings made out of?
316 Stainless Steel, which means they can be used both in external and internal applications.

Which wire cable rope is best suited?
The fittings will work only with 3.2mm stainless wire cable rope.
1 x 19 configuration for the cable is the best fit, but 7 x 7 and 7 x 19 will also work.

Which tools do I need?
The SSW050-6 (Bottle Screw) and SSW053-6 (Fork Terminal) require the use of the IF120X (Hydraulic Swager) to fasten the fitting to the wire.
Other tools that will be handy to complete the job are IF122X (Wire Cutter), IF133X (Spanner Tensioner) and IF114X (Coach Screw Drive Bit).

What is the recommended spacing between the wires?

80mm

What is the recommended spacing between intermediate posts?

1.5m

What is the maximum run span between end posts?

10m

Do you have any instructions on how to install the kit?
We sure do. Click on this link to download a PDF.

Cleaning & Maintenance

Without regular cleaning and maintenance discolouration of the surface of the stainless steel by corrosion (tea staining) can occur.

How to reduce the risk of tea staining

Absence of corrosives – especially salt, chlorine, cleaning acids etc.
Atmospheric Conditions – lower temperatures and low humidity are better.
Surface orientation – Open exposure to rain washing is better
Surface Finish – In general a smoother finish is better. where practical mirror polish finish may perform better than a brushed finish.
Chemical cleanliness or passivation of the surface improves corrosion resistance
Appropriate grade selection for conditions
Regular Maintenance to limit the accumulation of corrosives

Stainless steel cleaning schedule

The frequency of cleaning will vary depending on environmental factors i.e. proximity to the ocean, atmospheric and urban conditions. Below is intended as a guide and should be varied as required. We recommend using peek stainless steel polish for maintenance.

Environment	Distance from Coastline	Cleaning Schedule
Clean inland environment	20km +	Every 10 - 12 Months
Moderate urban or coastal environment	1-5km	Every 4 - 6 Months
Harsh urban or coastal environment	< 500m	Every 2 - 3 Months
Severe coastal/ marine environment	< 500m	Every 1 - 2 Weeks