Where would you normally use Stainless Wire Balustrade Kit S ? For hydraulically swaged 3.2mm cable balustrading between metal posts with a flat surface. This kit can be used for angled balustrade. (Not suitable for horizontal balustrade. For a matching horiontal balustrade kit see Kit K). This kit is not suitable for use on posts over 50mm in width.
What parts make up the kit ? 1 x SSW056-6 (M6 Terminal Right Hand Thread) 1 x SSW071-6 (Dome Head Terminal) 1 x SSW072-6 (Hex Head Tensioner) 1 x SSW085-6 (Small 37 Degree Collar for Flat Surfaces) 1 X SSW086-6 (Large 37 Degree Collar for Flat Surfaces)
What are the fittings made out of ? 316 Stainless Steel, which means they can be used both in external and internal application.
Which wire cable rope is best suited ? The fittings will work only with 3.2mm stainless wire cable rope. 1 x 19 configuration for the cable is the best fit, but 7 x 7 and 7 x 19 will also work.
Which tools do I need ? The SSW056-6 (M6 Terminal Right Hand Thread) and SSW071-6 (Dome Head Terminal) require the use of the IF120X (Hydraulic Swager) to fasten the fitting to the wire. The other tool that would be handy to complete the job is the IF122X (Wire Cutter).
Cleaning & Maintenance
Without regular cleaning and maintenance discolouration of the surface of the stainless steel by corrosion (tea staining) can occur.
How to reduce the risk of tea staining
Absence of corrosives – especially salt, chlorine, cleaning acids etc.
Atmospheric Conditions – lower temperatures and low humidity are better.
Surface orientation – Open exposure to rain washing is better
Surface Finish – In general a smoother finish is better. where practical mirror polish finish may perform better than a brushed finish.
Chemical cleanliness or passivation of the surface improves corrosion resistance
Appropriate grade selection for conditions
Regular Maintenance to limit the accumulation of corrosives
Stainless steel cleaning schedule
The frequency of cleaning will vary depending on environmental factors i.e. proximity to the ocean, atmospheric and urban conditions. Below is intended as a guide and should be varied as required. We recommend using peek stainless steel polish for maintenance.
Environment
Distance from Coastline
Cleaning Schedule
Clean inland environment
20km +
Every 10 - 12 Months
Moderate urban or coastal environment
1-5km
Every 4 - 6 Months
Harsh urban or coastal environment
< 500m
Every 2 - 3 Months
Severe coastal/ marine environment
< 500m
Every 1 - 2 Weeks
Ships From Adelaide
Local, relaible & affordable shipping anywhere in Australia
Money-Back Guarantee
Don't love it? Get in touch within 14 days & you'll get a full refund
In stock