Skip to content
About Us Our History Custom Woodturning Blogs & News The Workshed FAQ Downloads Review Us Contact Us
37 deg Bend for Ezirail 50mm Full Round (Pine)

37 deg Bend for Ezirail 50mm Full Round (Pine)

SKU: JH105R

Material: Pine Finger-Jointed

$40.15 - $40.15
$40.15
$40.15 - $40.15
$40.15

  per Piece

In stock Made in Australia
Ships from Adelaide Manufactured by Hammersmith

Quantity (per Piece):

Please Read Before Ordering

Depending on material availability, this product may be supplied in finger-jointed Pine rather than solid Pine. Finger-joints are visible (see product images for reference). Contact us before ordering is solid timber is preferred for your project, and we will check stock availability.

Description

Where would you normally use a timber handrail fitting?
As part of a handrail on a staircase when needing to change from the horizontal plane to a 37 degree incline/decline (most stairs are pitched at 37 degrees).

What is it made out of?
Plantation grown Radiata Pine that has been laminated and finger-jointed.

How do you fix it to the handrail?
Drill the end of the handrail (with a 16mm drill bit), then using a 16mm multi groove dowel, glue the rail to the pre-drilled bend. A small amount of sanding will be required to blend where they join.

How should you finish it?
As the handrail (to which the bend will be joined) has finger-jointing which is visible, we suggest that it should only be used for painting purposes.
If wanting to stain and lacquer, we suggest using the Vic Ash, American Oak or Mernati version of the same bend.
Speak to your local paint retailer for more info.

Product Dimensions

Overall: 50mm Diameter turning through 37 degrees with an internal radius of 110mm.
Both ends have a 16mm Diameter x 35mm Deep hole