Skip to content
About Us Our History Custom Woodturning Blogs & News The Workshed FAQ Downloads Review Us Contact Us
38mm diam Glass Standoff - 25mm Spacer - Satin

38mm diam Glass Standoff - 25mm Spacer - Satin

SKU: SSG105-S6

Material: Satin 316 Stainless

$14.96 - $14.96
$14.96
$14.96 - $14.96
$14.96

  per Piece

In stock
Ships from Adelaide

Quantity (per Piece):

Please Read Before Ordering

Fasteners for this product are sold seperately and will need to be added to the cart at the time of time of order. For fixing the product to a timber surface, the 115mm lag screw (SSG158-6) or 160mm lag screw (SSG157-6) can be used. For fixing to any surface other than timber, the 120mm standoff thread rod (SSG154-6) can be used.

Description

Where would you normally use a stainless steel glass standoffs ?
On a wall or end of a stair tread where glass balustrade is required.
It can be adjusted to suit glass from 12mm thick and under.

What is it made out of?
316 Stainless Steel in a Satin Finish.

Can it be used for exterior applications?
As it is 316 grade Stainless Steel, it is more than suitable for use outside.

What fasteners are supplied?
No fasteners (such as standoff thread rods, or lag screws) are provided, these will need to be purchased separately.

What size hole doo I need to drill in the glass?
The size of the hole in the glass should be at least 20mm in diameter.

Product Dimensions

Click on the CAD drawing for all the important dimensions.

The thread size in the rear of the fitting is 12mm (M12).

Cleaning & Maintenance

Without regular cleaning and maintenance discolouration of the surface of the stainless steel by corrosion (tea staining) can occur.

How to reduce the risk of tea staining

  • Absence of corrosives – especially salt, chlorine, cleaning acids etc.
  • Atmospheric Conditions – lower temperatures and low humidity are better.
  • Surface orientation – Open exposure to rain washing is better
  • Surface Finish – In general a smoother finish is better. where practical mirror polish finish may perform better than a brushed finish.
  • Chemical cleanliness or passivation of the surface improves corrosion resistance
  • Appropriate grade selection for conditions
  • Regular Maintenance to limit the accumulation of corrosives

Stainless steel cleaning schedule

The frequency of cleaning will vary depending on environmental factors i.e. proximity to the ocean, atmospheric and urban conditions. Below is intended as a guide and should be varied as required. We recommend using peek stainless steel polish for maintenance.

Environment Distance from Coastline Cleaning Schedule
Clean inland environment 20km + Every 10 - 12 Months
Moderate urban or coastal environment 1-5km Every 4 - 6 Months
Harsh urban or coastal environment < 500m Every 2 - 3 Months
Severe coastal/ marine environment < 500m Every 1 - 2 Weeks